← Back to Home

FANUC

FANUC CNC display upgrade solutions — A61L series fully compatible, plug-and-play LCD retrofit

A02B-0200-C071 (TATUNG CD14JBS)

$480

Fanuc D9CM-01A (Toshiba OEM)

$155

Fanuc MDT947B-1A (0092 variant)

$280

Fanuc TX-1424AB (0074 variant)

$299

About FANUC CRT Display Upgrades

FANUC is the world's largest CNC system manufacturer. Its CRT displays are widely used across the 0 Series, 0i Series, 16i/18i/21i Series, and Power Mate controls. Since CRT production has been fully discontinued, in-service displays increasingly suffer from dimming, blurring, color distortion, and startup failures.

Kongto Technology offers complete FANUC CRT-to-LCD upgrade solutions covering A61L-0001-0074 through 0097 and D9MM-11A variants. All modules use industrial-grade TFT-LCD panels with 350-450cd/m² brightness, 50,000+ hour lifespan, and the original Honda MR-20M connector for plug-and-play installation — no CNC parameter changes needed.

FANUC CRT→LCD Technical Specifications

Specification	Original CRT	Upgraded LCD
Resolution	640×400	800×600 ~ 1024×768
Brightness	~200cd/m²	350-450cd/m²
Lifespan	~15,000 hours	50,000+ hours
Power	~80W	~20W
Connector	Honda MR-20M	Honda MR-20M (original)
Power Supply	DC 24V	DC 24V (original)
Install Time	—	10-30 min

FANUC CRT Upgrade FAQ

Q: Do I need to change CNC parameters after upgrade?
A: No. All Kongto LCD modules use the original Honda MR-20M signal connector and DC 24V power supply. Plug-and-play with zero parameter changes.

Q: Which FANUC systems are compatible?
A: 0 Series, 0i-A/B/C/D, 16i/18i/21i, Power Mate, 30i — all major FANUC CNC systems are supported.

Q: What warranty do you offer?
A: 2-year warranty on all products with lifetime technical support. 500+ enterprise customers worldwide.

Get FANUC Upgrade Quote →

FANUC LCD Upgrade Products (Plug-and-Play, -)

A61L-0001-0092 LCD
$280- FANUC 6M/6T Series A61L-0001-0093 LCD
$155- FANUC 0/0i/16i/18i/21i A61L-0001-0094 LCD
$299 - FANUC 6/10/11/12 Series A61L-0001-0095 LCD
$199- FANUC 0/0i/15/16/18/21 A61L-0001-0096 LCD
$350- 12"/FANUC 15T/16/18/20/21 A61L-0001-0097 LCD
$350- FANUC 0/0-Mate A61L-0001-0072 LCD
$480- FANUC 6M/6T Series A61L-0001-0074 LCD
$299 - 14"/FANUC 15T/10 Series A61L-0001-0076 LCD
$280- FANUC 6/6B/6BII Series A61L-0001-0086 LCD
$280- 8.4"/FANUC 6/10/11/0-M A61L-0001-0090 LCD
$350- FANUC 0T/0M/6 Series NEW — D14CM-01A LCD
$480- Toshiba 14" CRT for FANUC 16/18 NEW — D9MM-11A LCD
$155 - Toshiba 9" CRT for FANUC 0/0i NEW — A02B-0094-C022 LCD
$480- CRT/MDI Combo Replacement NEW — A61L-0001-0116 LCD
$480- 12.1" CRT to LCD NEW — Series 0-P LCD
$480- A02B-0099-C094 Mono CRT

All FANUC Solutions

FANUC A61L-0001-0093 CRT to LCD Complete Replacement Guide —Step-by-Step

Complete 4-step guide: model ID, signal connection, physical install, and results. Plug-and-play, zero modifications.

Breathe New Life into Aging CNC — A61L-0001-0093 Restore Guide

FANUC A61L-0001-0093 LCD display breathes new life into aging CNC systems with plug-and-play upgrade.

FANUC CRT to LCD Upgrade Complete Guide

Step-by-step FANUC CRT to LCD upgrade guide covering technical principles and installation.

How to Retrofit FANUC CRT to LCD - Kongto Case Study

Real-world case study of FANUC CRT to LCD retrofit by Kongto Technology.

FANUC A61L-0001-0074 14-Inch Color CRT to LCD Retrofit Guide

FANUC A61L-0001-0074 14-inch color CRT to LCD retrofit guide. Professional conversion solution.

FANUC A61L-0001-0086 Panasonic CRT Display LCD Replacement

Complete guide for converting FANUC A61L-0001-0086 color CRT display to LCD.

FANUC A61L-0001-0090 9-Inch Monochrome CRT to LCD Retrofit

Complete guide for retrofitting FANUC A61L-0001-0090 9-inch monochrome CRT display to LCD.

FANUC A61L-0001-0092 MDT947B 9-Inch Monochrome LCD Replacement

FANUC A61L-0001-0092 MDT947B 9-inch monochrome CRT to LCD retrofit guide.

A61L-0001-0093 vs Compatible Alternatives (D9MM-11A Equivalent)

FANUC A61L-0001-0093 LCD display specifications, compatibility, and CRT-to-LCD upgrade guide.

FANUC A61L-0001-0094 14-Inch Color Display Replacement Guide

Complete guide for retrofitting FANUC A61L-0001-0094 14-inch color CRT display to LCD.

FANUC A61L-0001-0095 9-Inch Color LCD Upgrade Solution

FANUC A61L-0001-0095 9-inch color LCD replacement. Direct replacement, plug-and-play.

FANUC A61L-0001-0096 CRT Display Professional LCD Replacement Solution

FANUC A61L-0001-0096 CRT display dedicated LCD replacement, no modification required, compatible with FANUC 0i/16i/18i series.

FANUC A61L-0001-0097 LCD Upgrade —CRT to LCD Replacement

FANUC A61L-0001-0097 CRT display dedicated LCD replacement, no modification required, plug-and-play.

FANUC D9MM-11A (A61L-0001-0093) 9-Inch LCD Upgrade Solution

FANUC D9MM-11A (A61L-0001-0093) 9-inch monochrome display LCD upgrade. Original interface, plug-and-play.

FANUC CRT Repair vs LCD Upgrade Cost Comparison

Side-by-side cost comparison of FANUC CRT repair versus LCD retrofit modules.

FANUC 0i System Display FAQ & Solutions

FAQ and solutions for FANUC 0i system display issues covering compatibility, upgrades, and troubleshooting.

A61L-0001-0093 Display Troubleshooting FAQ

FAQ and solutions for FANUC A61L-0001-0093 display issues: black screen, blur, flicker, and more.

Kongto Technology Launches FANUC LCD Retrofit Solutions

Press release: Kongto Technology announces comprehensive LCD retrofit solutions for FANUC CNC displays.

FANUC A02B-0094-C022 CRT/MDI to LCD Upgrade Guide

Complete guide for FANUC A02B-0094-C022 CRT/MDI combo unit LCD replacement. Covers model identification, installation, and specifications.

FANUC A61L-0001-0116 CRT to LCD Upgrade Guide

FANUC A61L-0001-0116 12.1-inch CRT to LCD upgrade. Specs comparison, installation steps, compatible systems list.

FANUC Series 0-P A02B-0099-C094 CRT to LCD Upgrade

Monochrome green CRT to LCD replacement guide for FANUC Series 0-P / A02B-0099-C094 classic CNC controls.

Frequently Asked Questions About FANUC CRT to LCD Upgrade

Is FANUC still making CRT displays?

FANUC discontinued CRT display production years ago. OEM replacements are no longer available. Our LCD module is the only practical solution to keep your CNC running with a clear, reliable display.

Will the LCD replacement work with my existing FANUC CNC electronics?

Yes. The LCD module uses the same connector and signal protocol as the original FANUC CRT. No changes to the CNC control, parameters, or wiring are needed. True plug-and-play replacement.

How long does installation take?

10-15 minutes for a technician. Power off, remove old CRT, disconnect cables, mount LCD module, reconnect, power on. No soldering, no special tools, no parameter changes required.

What is the image quality improvement?

Our LCD modules offer 800x600+ resolution (vs 640x400 CRT), 350-450 cd/m2 brightness, 50,000+ hour lifespan. Text is sharper, no flicker, readable in direct sunlight. Significant upgrade over the original CRT.

What warranty do you offer on FANUC LCD replacements?

2-Year Warranty with lifetime technical support. . In-stock items ship within 24 hours. .

What Our Customers Say

"Ordered LCD modules for our FANUC CNCs. Plug-and-play install, great picture quality. Saved us vs buying new machines."

— John D., USA (June 2026)

"Fast shipping from China, well packaged. The LCD replacement worked perfectly on our FANUC control. Highly recommended."

— Marco R., Italy (May 2026)

"Our FANUC CRT finally gave out after 25 years. This LCD brought our CNC back to life. Excellent quality, fair price."

— Akira T., Japan (June 2026)