FANUC 16i, 18i, and 21i controls use 14-inch color CRT displays. Our replacement LCD modules fit the original frame and connector — no parameter changes, no rewiring. Compatible models: A61L-0001-0094, 0095, 0097.
Find your CRT model below — every one is a drop-in replacement using the original connector. No CNC parameter changes, no rewiring.
| CRT Model | LCD Size |
|---|---|
| A61L-0001-0074 | 14" Color CRT |
| A61L-0001-0094 | 14" Color CRT |
| A61L-0001-0095 | 9" Color CRT |
| A61L-0001-0097 | 14" Color CRT |
CRT displays on FANUC 16i/18i/21i controls fail progressively: dimming screen, flickering, image retention, and eventual blank output. An LCD replacement module removes every CRT-specific failure point — no flyback transformer, no high-voltage tube, no deflection board. Expect 800x600 resolution, 350+ cd/m² brightness, and 50,000+ hour lifespan versus ~15,000 hours for a CRT.
Each module uses the same connector as the original CRT (20-pin Honda MR-20M on most models). Power off the machine, unplug the old CRT, plug in the LCD, power on. Typical install: 10-15 minutes. Every module ships with a 2-year warranty and lifetime technical support.
Power off, unplug the color CRT, connect the LCD module using the existing connector, power on. Installation takes 10-15 minutes with no parameter changes.
A61L-0001-0094 (14-inch color), A61L-0001-0095 (9-inch color), and A61L-0001-0097 (14-inch color). The 0094 is the most common 14-inch color module for 16i/18i controls.
Yes. LCD modules deliver higher resolution, no flicker, no image retention, and 50,000+ hour lifespan. They also eliminate high-voltage hazards from the flyback transformer.
Looking for another brand or control? Browse the full compatibility matrix (52+ models, 12 brands) or check 8-inch LCD replacements for the most common size.