FANUC 0i LCD Upgrade — CRT to LCD Replacement Guide

FANUC 0i and 0 series controls use 9-inch monochrome and 14-inch color CRT displays. Our LCD replacement modules are drop-in — same 20-pin Honda connector, no parameter changes. Compatible models: A61L-0001-0093, 0092, 0094, 0095, 0097 and the D9MM-11A equivalent.

Compatible Display Models for FANUC 0i

Find your CRT model below — every one is a drop-in replacement using the original connector. No CNC parameter changes, no rewiring.

CRT Model	LCD Size
A61L-0001-0074	14" Color CRT
A61L-0001-0086	8.4" Monochrome CRT
A61L-0001-0092 / MDT947B-1A	9" Monochrome CRT
A61L-0001-0093	9" Monochrome CRT
A61L-0001-0094	14" Color CRT
A61L-0001-0095	9" Color CRT
A61L-0001-0096	14" Color CRT
A61L-0001-0097	14" Color CRT
D9MM-11A-0093 / D9MM-11A / KF-M7099H	9" Monochrome CRT

Why Upgrade Your FANUC 0i CRT to LCD?

CRT displays on FANUC 0i controls fail progressively: dimming screen, flickering, image retention, and eventual blank output. An LCD replacement module removes every CRT-specific failure point — no flyback transformer, no high-voltage tube, no deflection board. Expect 800x600 resolution, 350+ cd/m² brightness, and 50,000+ hour lifespan versus ~15,000 hours for a CRT.

Installation Is Plug-and-Play

Each module uses the same connector as the original CRT (20-pin Honda MR-20M on most models). Power off the machine, unplug the old CRT, plug in the LCD, power on. Typical install: 10-15 minutes. Every module ships with a 2-year warranty and lifetime technical support.

Frequently Asked Questions

How do I upgrade my FANUC 0i display from CRT to LCD?

Power off the machine, unplug the existing CRT (20-pin Honda MR-20M connector on most models), plug in the LCD module, and power on. No parameter changes or rewiring. Typical install is 10-15 minutes.

Which FANUC 0i CRT models are covered?

A61L-0001-0093, A61L-0001-0092, A61L-0001-0094, A61L-0001-0095, A61L-0001-0097, MDT947B-1A, and the Toshiba D9MM-11A (an OEM equivalent of the 0093).

Does the LCD module work on FANUC 0i-C or 0i-D?

Yes. The 0093 and 0092 modules are used across FANUC 0, 0i-C, 0i-D, 16i, 18i, and 21i controls. Confirm your CRT model and connector type for full compatibility.