FANUC
FANUC A61L-0001-0116 9-inch Plasma (PDP) to LCD Upgrade
FANUC A61L-0001-0116 9-inch plasma (PDP) to 8-inch TFT-LCD upgrade. Factory direct, plug-and-play, in-position replacement.
$350
USD
✔️ In Stock — 2-Year Warranty
🛒 Buy Now
1
—
—
🔒 Secure checkout via PayPal. Credit/debit cards accepted.
Specifications
| Spec | Original Display | Kongto LCD |
|---|---|---|
| Technology | 9-inch Plasma (PDP) | 8-inch TFT-LCD Industrial Panel |
| Resolution | 640x400 / 640x480 | 800x600 |
| Brightness | ~200 cd/m2 | 350-450 cd/m2 |
| Lifespan | ~15,000 hrs | 50,000+ hrs |
| Power | DC 24V | DC 24V (original) |
| Interface | 20-pin Honda MR-20M | 20-pin Honda (direct compatible) |
| Safety | Internal high voltage | Low voltage DC |
| Weight | — | 1.5 kg |
Compatible Systems
- FANUC Series 0 / 0-Mate / 0-TMate
- FANUC 0i-A / 0i-B / 0i-C / 0i-D
- FANUC Series 16i / 18i / 21i
- All CNC machines with FANUC A61L-0001-0116 display
Common Failure Symptoms
- Blank screen / no power — Power supply or driver board failure, most common in aging units
- Dim or unreadable display — Panel and driver degradation after 15,000+ hours of operation
- Flickering or image distortion — Capacitor degradation in sync circuits
- Partial image or horizontal lines — Panel driver or wiring fault
- Intermittent display — Loose internal connections or cold solder joints
Our LCD module eliminates all of these failure modes permanently. Higher brightness, lower power, no high voltage.
Frequently Asked Questions
Does this work with my CNC machine?
Yes. Uses same connector as the original display. Drop-in replacement. No parameter changes needed.
Installation time and difficulty?
10-15 minutes: power off, remove screws, swap display, reconnect. No soldering required.
Image quality vs the original display?
800x600 resolution, higher brightness, 50,000+ hr lifespan. Sharper image, no flicker.
Warranty and support?
2-Year Warranty, lifetime technical support, worldwide shipping from our Shenzhen factory.
Warranty & Service
2-Year Warranty — Lifetime Technical Support — Worldwide Shipping
Email: [email protected] | WhatsApp: +86-13686889647
No CNC parameter changes needed — plug and play, your machine programs and settings stay intact.
CRT failure symptoms & repair cost · Customer results · Quality testing process
Email: [email protected] | WhatsApp: +86-13686889647
No CNC parameter changes needed — plug and play, your machine programs and settings stay intact.
CRT failure symptoms & repair cost · Customer results · Quality testing process
Ready to upgrade your display?
$350 — In Stock — Ships within 24 hours