FANUC A61L-0001-0093
LCD升级显示器
厂家现货直发 — 8英寸TFT-LCD即插即用替代方案。无需修改CNC参数，30分钟安装完成。
现货 — 2年质保
$155 USD
Tech Specs: CRT vs Kongto LCD
| Spec | Original CRT | Kongto LCD |
|---|---|---|
| Technology | 9" Monochrome CRT | TFT-LCD Industrial Panel |
| Resolution | 640x400 | 800x600 (Higher) |
| Brightness | 200 cd/m2 | 350-450 cd/m2 |
| Lifespan | ~15,000 hrs | 50,000+ hrs |
| Power | 25-30W | 8-12W (60%+ savings) |
| Temperature | 0~40C | -10~+60C |
| Interface | HONDA 20-pin | HONDA 20-pin (100% compatible) |
| Safety | High voltage (10-15kV) | Low voltage DC 24V |
| Weight | ~1.5kg | ~1.5kg |
Compatible Systems
- FANUC Series 0 / 0-Mate / 0-TMate
- FANUC 0i-A/B/C/D
- FANUC 16i / 18i / 21i
- FANUC OM-D / OM-C
- All CNC machines with A61L-0001-0093 display
Signal Wiring & Pinout (HONDA 20-Pin)
The A61L-0001-0093 CRT connects via a standard HONDA 20-pin connector. Our LCD replacement module uses the same connector — no rewiring or adapter boards needed. Below is the pin mapping for reference:
| Pin | Signal | Description | Wire Color (Typical) |
|---|---|---|---|
| 1 | GND | Signal Ground | Black |
| 2 | GND | Signal Ground | Black |
| 3 | R (Video) | Red Video / Monochrome Video | Red |
| 4 | GND | Video Ground | Black |
| 5 | HS | Horizontal Sync (TTL) | White |
| 6 | VS | Vertical Sync (TTL) | Yellow |
| 7 | NC | Not Connected | — |
| 8 | NC | Not Connected | — |
| 9 | +24V | DC Power Input | Red/White |
| 10 | GND | Power Ground | Black/White |
| 11–20 | NC/GND | Spare or Chassis Ground | Various |
Note: The A61L-0001-0093 uses TTL-level RGB signals (0–5V, not analog 0.7V). Our LCD module accepts both TTL and analog inputs on the same pins, so no signal conversion is needed. If your machine uses a different pin arrangement, refer to our compatibility matrix.
Common FANUC A61L-0001-0093 Display Problems
The FANUC A61L-0001-0093 is a 9-inch monochrome CRT display used extensively on FANUC 0-series and 0i-series CNC systems from the 1980s through early 2000s. After 15–30 years of operation, these CRTs develop characteristic failure modes:
- Blank screen / no display — The CRT heater fails or the flyback transformer breaks down. Most common failure. The CNC still operates (keys beep, spindle moves), but the screen stays dark.
- Dim display / low brightness — The CRT phosphor has degraded from extended use. Even with max brightness adjustment, the display is too dim to read under shop floor lighting.
- Flickering or shaky image — Sync circuit components (capacitors, ICs) drift out of spec. The image jitters or scrolls vertically.
- Horizontal or vertical line collapse — One of the deflection circuits fails. The image compresses to a bright horizontal or vertical line.
- Burned-in image / ghosting — Static elements (position readout, mode display) become permanently visible as a ghost image on the phosphor.
All of these are CRT hardware failures. The CNC control itself is typically still functional — replacing just the display with our LCD module restores full visibility without replacing the entire control system.
常见问题
这款LCD替换件是否兼容所有FANUC CNC型号 that use the A61L-0001-0093 CRT?
Will I lose any CNC functionality after replacing the CRT with LCD?
What is the installation time and difficulty level?
How does the LCD image quality compare to the original CRT?
What warranty comes with the A61L-0001-0093 LCD module?
Why is my Fanuc A61L-0001-0093 CRT monitor blinking or flickering, and how do I fix it?
Is it cheaper to repair my old CNC CRT or upgrade to an LCD?
Can I use a standard consumer LCD monitor to replace my Fanuc CNC CRT display?
What Our Customers Say
"The CRT on my FANUC 0i-MC was barely readable. The LCD module arrived in 5 days, installed in 15 minutes. Crystal clear display now. Best I've spent on this machine."
— John D., California, USA (June 2026)
"Perfect drop-in replacement for our 1998 FANUC 0-TD. Plug and play as advertised. No parameter changes needed. We ordered 3 more for our other machines."
— Marco R., Milan, Italy (May 2026)
"Our FANUC 16i-MA CRT finally gave out after 22 years — this LCD worked perfectly as a replacement. Quick DHL shipping from China, well packaged. Highly recommended."
— Akira T., Osaka, Japan (June 2026)
Warranty & Service
2-Year Warranty - Lifetime Technical Support -
Ready to upgrade?
[email protected] | +86-13686889647 | WhatsApp
Contact UsWholesale / OEM Orders
We accept bulk orders and OEM customization. Factory direct, fast delivery, stable quality. MOQ negotiable. Contact us for volume pricing.
📞 +86-13686889647 | ✉️ [email protected]
All content on this site is original. Protected under copyright law. Unauthorized reproduction prohibited. Written by szkongto01.