Mitsubishi M64 controls use the 9-inch monochrome MDT962B CRT. Our LCD modules are drop-in replacements using the original connector. Compatible models: MDT962B / MDT962B-1A / MDT962B-4A (9-inch).
Find your CRT model below — every one is a drop-in replacement using the original connector. No CNC parameter changes, no rewiring.
| CRT Model | LCD Size |
|---|---|
| MDT962B / MDT962B-1A / MDT962B-4A | 9" Monochrome CRT |
| MDT1283B — Mazak Mazatrol display, not M64 | 10.4" TFT-LCD |
CRT displays on Mitsubishi M64 controls fail progressively: dimming screen, flickering, image retention, and eventual blank output. An LCD replacement module removes every CRT-specific failure point — no flyback transformer, no high-voltage tube, no deflection board. Expect 800x600 resolution, 350+ cd/m² brightness, and 50,000+ hour lifespan versus ~15,000 hours for a CRT.
Each module uses the same connector as the original CRT (20-pin Honda MR-20M on most models). Power off the machine, unplug the old CRT, plug in the LCD, power on. Typical install: 10-15 minutes. Every module ships with a 2-year warranty and lifetime technical support.
Power off, unplug the CRT, connect the LCD module with the original connector, power on. Typical install is 10-15 minutes with no parameter changes.
MDT962B (9-inch monochrome, also used on M3/M300). The 12-inch MDT1283B is a Mazak Mazatrol display (M32/T32), not an M64 unit.
No. MDT1283B (12-inch) belongs to Mazak Mazatrol M32/T32 machines; M64 controls use the 9-inch MDT962B. See our Mazak MDT1283B guide if your machine is a Mazak.
Looking for another brand or control? Browse the full compatibility matrix (52+ models, 12 brands) or check 8-inch LCD replacements for the most common size.