Mitsubishi E60/E68 controls use 9-inch monochrome CRT displays. Our LCD modules are drop-in replacements using the original connector. Compatible models: MDT962B and BM09DF.
Find your CRT model below — every one is a drop-in replacement using the original connector. No CNC parameter changes, no rewiring.
| CRT Model | LCD Size |
|---|---|
| MDT962B / MDT962B-1A / MDT962B-4A | 9" Monochrome CRT |
| BM09DF | 9" Monochrome CRT |
CRT displays on Mitsubishi E60 controls fail progressively: dimming screen, flickering, image retention, and eventual blank output. An LCD replacement module removes every CRT-specific failure point — no flyback transformer, no high-voltage tube, no deflection board. Expect 800x600 resolution, 350+ cd/m² brightness, and 50,000+ hour lifespan versus ~15,000 hours for a CRT.
Each module uses the same connector as the original CRT (20-pin Honda MR-20M on most models). Power off the machine, unplug the old CRT, plug in the LCD, power on. Typical install: 10-15 minutes. Every module ships with a 2-year warranty and lifetime technical support.
Power off the machine, unplug the MDT962B or BM09DF CRT, connect the LCD module with the original connector, and power on. No parameter changes required.
MDT962B (including -1A and -4A variants) and BM09DF. Both are 9-inch monochrome displays used on E60/E68 controls.
Yes. We ship worldwide via DHL/FedEx — USA 5-7 days, Europe 5-10 days, Asia 3-5 days. Every module includes a 2-year warranty and lifetime support.
Looking for another brand or control? Browse the full compatibility matrix (52+ models, 12 brands) or check 8-inch LCD replacements for the most common size.