CNC Display Upgrade — Customer Success Stories

Automotive Parts Manufacturing — FANUC 0i-C

Location: Guangdong, China

Equipment: 12× FANUC 0i-C CNC lathes (1998-2002)

Problem: CRT displays showing severe dimming, flickering, and burn-in. Operators struggling to read parameters. Production quality affected.

Solution: Installed A61L-0001-0093 LCD upgrade modules across all 12 machines.

Results:

• [OK] Installation completed in 3 hours for all 12 machines
• [OK] Zero CNC parameter changes needed
• [OK] Display clarity restored to factory-new level
• [OK] Saved ~$48,000 vs replacing CNC control systems
• [OK] Machines continue operating reliably (installed 2023)

Tool & Die Shop — Mitsubishi M64

Location: Ohio, USA

Equipment: 3× Mitsubishi M64-based machining centers (2001)

Problem: MDT962B CRT displays had severe color distortion. One display completely failed, halting production on that machine.

Solution: Replaced all 3 MDT962B CRTs with our TFT LCD retrofit kits. Shipped via DHL (5 days).

Results:

• [OK] Each swap took under 15 minutes
• [OK] Original connectors — no wiring changes
• [OK] Saved ~$15,000 vs OEM replacement quotes
• [OK] Operator feedback: "Like using a brand new machine"

Heavy Equipment Repair — Siemens 840D

Location: Bavaria, Germany

Equipment: 2× Siemens SINUMERIK 840D machining centers (2004)

Problem: 6FC3988-7FA20 displays intermittently blanking. Siemens OEM replacement cost: €3,200 each.

Solution: Installed our AC110V-compatible LCD upgrade modules.

Results:

• [OK] Direct plug-and-play replacement
• [OK] Saved ~€5,200 vs OEM replacement
• [OK] Brighter, sharper display than original
• [OK] 2-year warranty coverage

Precision Machining — Mazak T-32

Location: Aichi, Japan

Equipment: 4× Mazak CNC lathes with Mazatrol T-32 (1999)

Problem: CD1472-D1M CRTs showing age-related brightness loss. Some had visible burn-in from years of displaying the same interface.

Solution: CD1472-D1M LCD replacement kits.

Results:

• [OK] All 4 machines upgraded in one afternoon
• [OK] Preserved all Mazatrol interface features
• [OK] Extended equipment life by estimated 8+ years
• [OK] Production team reported reduced eye strain

Contract Manufacturing — Haas VF Series

Location: Texas, USA

Equipment: 6× Haas VF-2/VF-3 machining centers (2000-2003)

Problem: Multiple CRT displays showing symptoms — dimming, flickering, color casts. Haas OEM replacement: $2,400 each.

Solution: Installed Haas-compatible LCD retrofit kits on all 6 machines.

Results:

• [OK] Saved ~$12,000 vs Haas OEM replacement
• [OK] All machines back to full production in 1 day
• [OK] Displays significantly brighter than original CRTs
• [OK] 2-year warranty and lifetime technical support

"We were quoted $8,000 per machine to replace the CNC control. Your LCD kit solved the problem for under $300 each. The installation was literally 4 screws and 1 cable." — Production Manager, Automotive Parts Manufacturer, China

"We tried repairing our old CRTs twice. Each repair lasted 6 months and cost $400. Your LCD upgrade cost $250 and has been running flawlessly for 2 years. Best decision we made." — Maintenance Engineer, Tool & Die Shop, USA

"Fast shipping to Germany, perfect fit, and the display is actually better than the original Siemens. We're planning to upgrade our remaining machines too." — CNC Programmer, Heavy Equipment Manufacturer, Germany